כללי מגנט למכונת תפירה

Product Category: Sewing Machine Parts
Material: Metal

1. When using, first press the cloth to be pressed under the presser foot of the sewing machine as usual
2. Place the "positioning gauge block" on the edge of the cloth and place it on the sewing machine
There is a magnet under the gauge block, which is firmly attached to the sewing machine. After placing it, start sewing. During the sewing process, the cloth edge will lean against the block edge of the gauge block to automatically correct the stitch.
3. After sewing a stitch, remove the gauge block and adjust the cloth to be pressed. Press the starting point of the second stitch to be pressed under the presser foot of the sewing machine
Then put the gauge block on the edge of the cloth again,
Continue to sew after leaning.
4. After sewing the second stitch, if you want to press a few more stitches, repeat the above steps