אקדח אוויר חם 300W, אקדח חום נייד מיני לעשה זאת בעצמך, מלאכת יד, עטיפה כיווץ

Features:

Can be used to heat embossing powder and shrink film.

Hold the item 3 to 5 cm away and heat at an angle of approximately 45 degrees until complete.

Once finished, use a high-temperature heat gun for a few seconds.

This increases both hardness and shine.

The temperature is not adjustable; it can theoretically reach 200 degrees in a few seconds.

Do not heat for more than 10 minutes and blow at a 45-degree angle to avoid overheating. Exercise caution when using a heat gun.

Specifications:

Color: Black

Material: ABS

Type: Constant Temperature

Operating Temperature: 200°C / 390°F, reached in seconds

Rated Power: 300W

Power Supply: AC

Rated Voltage: 220V and 230V

Frequency: 50Hz

Body Time: 8 minutes

Material: Steel and Plastic

Operating Temperature: 200°C

Rated Power: 300W

Rated Voltage: EU Plug (220V)

Plug Type: EU Plug

Instructions:

1. Plug in the heat gun.

2. Hold the heat gun without touching the hot nozzle.

3. Hold the heat gun 5 to 6 cm from the workpiece and heat to approximately 45°C until the piece is finished.

4. Turn off the power to allow it to cool.