אקדח חום נייד 300W כף יד אקדח חום מיני נייד למלאכות עשה זאת בעצמך עטיפה מתכווצת

Features:

Can be used to heat embossed powder and shrink film

Leave the work at a distance of 3-5 cm and heat it at an angle of about 45 degrees until it is complete.

When finished, use a high-temperature heat gun to blow for a few seconds

It can not only increase hardness, but also increase brightness

The temperature cannot be adjusted, theoretically it can reach 200 degrees within a few seconds

Do not work for more than 10 minutes and blow at a 45 degree angle to avoid heat absorption. Be careful when using a heat gun

Specification:

Color: black

Material: ABS

Type: Constant temperature

Operating temperature: 200°C / 390°F can be reached within a few seconds

Rated power: 300W

Power type: AC power

Rated voltage: 220V & 230V

Power: 50Hz

Working time: 8 minutes

Material: Steel Plastic

Working temp.: 200 °C

Rated Power: 300W

Rated voltage: Input Voltage: UK Plug(220V)

Plug Type: UK Plug

Usage:

1. Insert the heating tool

2. Hold the spray gun but do not touch the hot nozzle

3. Keep the heat gun at a distance of 5-6cm from your work, and heat it at about 45° until the work is completed

4. Turn off the power to keep it cool